JUKI LH-3500A series Instruction Manual page 15

(2) Releasing procedure of the grease-up warning for SC-920
2
1
WARNING :
To avoid possible personal injuries caused by movement other than that you desired, do not operate
the switches in the procedure other than those required, as described below, to specify the functions.
2
1
2
1
Keep pressing switch
continuously. If the setting No. 6 is moved forward (or backward), the previous (or subsequent)
content of the setting is confirmed. Be careful when the content of a setting is changed (when
the up / down switch is touched).
5
6
3 4
5
6
3 4
5
6
3 4
2 or switch
– 3 –
When the tme of grease-up has
come, screen dsplay of LE� 5 on
the left-hand figure becomes "E220".
After performng grease-up, release
the warnng followng the procedure
below.
) Turn OFF the power to the unt.
2) Pressng swtch
the power to the unt.
3) When the screen s dsplayed,
keep swtch
for three seconds untl the buzzer
sounds twce.
4) Set the settng No. 6 to "8".
When you want to advance the
settng No. 6 , press swtch
2 to advance the settng No. 6
When you want to return the set-
tng No. 6 , press swtch
to return the settng No. 6
1 , and the setting No. 6 will advance (return)
4 , turn ON
4 held pressed
1