Led Operation - IMC Networks IE-Giga-MiniMc Operation Manual

LED Operation

Each IE-Giga-MiniMc converter includes two LEDs, located on the RJ-45 connector.
LED functions are as follows
FX LNK/ACT Glows green when a link is established on the fiber port; blinks
green when activity is detected on the fiber port.
TX LNK/ACT Glows amber when a link is established on the copper port; blinks
amber when activity is detected on the copper port.
Powering the IE-Giga-MiniMc
IE-Giga-MiniMc supports three powering options.
• A country-specific AC power adapter (included)
• The 4-terminal DC power block
• IE-PowerTray/18
DC Terminal Block Wiring Instructions
The IE-Giga-MiniMc can be powered via the DC terminal block. From a power
source, connect to any one positive and any one negative terminal on IE-Giga-
MiniMc.
FX LNK/ACT
Connected to Chassis
2
TX LNK/ACT