Led Operation - IMC Networks iMcV-LIM Operation Manual

AutoCross Feature for Twisted Pair Connection
All twisted pair ports on the iMcV-LIM includes AutoCross, a feature that
automatically selects between a crossover workstation and a straight-through
connection depending on the connected device.

LED Operation

Each iMcV-LIM module features diagnostic LEDs that provide information on features
and ports.
Upper
FEF Fiber Far End Fault
TXLL TX LinkLoss/Blink if Active
LNK FiberLink is valid/Flash on Activity
DIS Software Disabled TX Port
Upper
FA FiberAlert enabled/Blink Active
FXLL FX LinkLoss/Blink if Active
LNK FX LinkLoss is valid/Flash on Activity
DIS Software Disabled fiber port
(via iView²)
Upgrade LED Stacks
Function
Function
8
State
ON Green
ON Green
ON Green
On Yellow
State
ON Green
ON Green
ON Green
On Yellow