Software Configuration - IMC Networks IE-MiniFiberLinX-II Operation Manual

Software Configuration

The following table presents port options configurable from iView² or from a
serial/Telnet session. Refer to the iView² section later in this chapter or the iView²
Help file for more information. For information on configuring VLANs, refer to the
Serial Configuration/Telnet Session section in this chapter.
Feature
FX/TX LinkLoss
FiberAlert
Loopback
Auto Negotiation
Selective Advertising
Force Mode
FlowControl
Bandwidth Control
VLANs
Last Gasp (Telco /LastGasp model only
The following table presents management options configurable via iConfig or a
serial/Telnet session.
Feature
PROM Software Download/Upload
Telnet Session
TFTP Trigger
Software Download Setup (TFTP)
DHCP
Configuration File/Save Restore
The following options are configurable through both iConfig and Serial:
•
IP Address
•
Subnet Mask
•
Default Gateway
•
MIB Community
•
Traps Assignment
•
Users
•
Passwords
•
Access Level
•
Reboot
iView² Serial/Telnet
iView² Serial/Telnet
10