Save Configuration; Resetting The Vcx V7111 - 3Com VCX V7111 User Manual

Save Configuration

The Save Configuration screen enables users to save the current parameter configuration
and the loaded auxiliary files to the non-volatile memory so they are available after a power
fail. Parameters that are only saved to the volatile memory revert to their previous settings
after hardware reset.
Note that when performing a software reset (i.e., via Web or SNMP) you can choose to save
the changes to the non-volatile memory. Therefore, there is no need to use the Save
Configuration screen.
Saving changes to the non-volatile memory may disrupt traffic on the gateway. To avoid this,
disable all traffic before saving.
To save the changes to the non-volatile, follow these steps:
1
Click the Save Configuration button on the main menu bar; the 'Save Configuration'
screen is displayed.
Figure 72
Save Configuration Screen
2
Click the Save Configuration button in the middle of the screen; a confirmation
message appears when the save is complete.

Resetting the VCX V7111

The Reset screen enables you to remotely reset the gateway. Before reset you can choose
to save the gateway configuration to flash memory.
To reset the VCX V7111, follow these steps:
1 Click the Reset button on the main menu bar; the Reset screen is displayed.
3Com VCX V7111 VoIP SIP Gateway User Manual 145