Feed Cable From Cable Tree - Precor move beyond S3.25 Assembly And Maintenance Manual

S3.25 Assembly and Maintenance Guide

14. Feed Cable From Cable Tree

A. Feed the Spring Clip end of Cable 44371-103 under
a 4½-inch pulley, through the lower pulley window of
the Main Upright, and through the upper pulley
window of the Main Upright. Attach the pulley to the
lower pulley window using
one 2¾-inch bolt
two step spacers
one locknut
B. Wrap the cable over a 4½-inch pulley and attach it
to the upper pulley window using
one 2¾-inch bolt
two step spacers
one locknut
C. Feed the Cable over one 4½-inch pulley and attach
it to the upper hole in the Press Arm Flats using
one 2-inch bolt
two washers
one locknut
Finger tighten.
D. Ensure the Cable wraps around the pulley and
then feed the Cable back through the Press Arm
Flats. Wrap the Cable over and around one 4½-
inch pulley and attach it to the Prestretch Tube
using
one 2-inch bolt
two washers
one cam washer
one locknut
Finger tighten.
Step 14. Feed Cable From Cable Tree
Upper Pulley
Window
Cable 44371-103
Cable Tree
1 - 4½" pulley
A
1 - 2¾" bolt
2 - step spacers
1 - locknut
Lower Pulley
Window
1 - 4½" pulley
1 - 2" bolt
C
2 - washers
1 - locknut
1 2
Main Upright
1 - 4½" pulley
1 - 2¾" bolt
B
2 - step spacers
1 - locknut
Spring Clip
Press Arm
3 4 5
Prestretch
Tube
1 - 4½" pulley
D 1 - 2" bolt
2 - washers
1 - cam washer
1 - locknut
6
page 27