Attach Shrouds - Precor move beyond S3.25 Assembly And Maintenance Manual

S3.25 Assembly and Maintenance Guide

22. Attach Shrouds

Important: Before attaching the Shrouds, make any
necessary adjustments. Refer to Chapter 4,
"Adjustments and Maintenance" on page 36 for
instructions.
A. Place one Large Shroud on each side of the Main
Upright and Rear Upright and attach using
six 2¾-inch bolts
twelve washers
six locknuts
B. Place the Small Shroud around the Weight Stack
and attach it to the Large Shroud using
two ¾-inch bolts
two washers
C. Attach the Small Shroud to the Angle Bracket in the
Main Upright Base using
one ¾-inch bolt
one washer
This completes the assembly of your Precor S3.25.
Step 22. Attach Shrouds
Main Upright
Large Shroud
Small Shroud
Weight Stack
Main Upright Base
1 2
Large Shroud
Large Shroud
6 - 2¾" bolts
A
12 - washers
6 - locknuts
Small
Shroud
1 - ¾" bolt
C
1 - washer
Angle Bracket
3 4 5
2 - ¾" bolts
B
2 - washers
6
page 36