Attach Rotating Arm And Handles - Precor move beyond S3.25 Assembly And Maintenance Manual

S3.25 Assembly and Maintenance Guide
4. Attach Rotating Arm and
Handles
A. Attach the Rotating Arm to the Upright Flats using
two ¾-inch buttonhead bolts
Tighten with 6-mm Allen wrench.
B. Attach the Handles to the Seat Upright using
two 3¼-inch bolts
four washers
two locknuts
Wrench tighten.
Step 4. Attach Rotating Arm and Handles
Upright Flats
Handle
Seat Upright
1 2
A
2 - ¾" buttonhead bolts
Handle
3 4 5
Rotating Arm
2 - 3¼" bolts
B
4 - washers
2 - locknuts
6
page 13