Attach Chest Press Base - Precor move beyond S3.25 Assembly And Maintenance Manual

S3.25 Assembly and Maintenance Guide

2. Attach Chest Press Base

A. Attach the Chest Press Base to the Main Upright
using
one 3¼-inch bolt
two washers
one locknut
Finger tighten.
B. Attach the Floor Base to the Chest Press Base
using
two 3-inch bolts
four washers
two locknuts
Finger tighten.
If any parts remain, set them to the side for future
steps.
Step 2. Attach Chest Press Base
1 - 3¼" bolt
A
2 - washers
1 - locknut
2 - 3" bolts
B
4 - washers
2 - locknuts
1 2 3
Main Upright
Main Upright Base
Floor Base
Chest Press Base
4 5 6
page 10