Attach Surgical Tubing To Top Beam - Precor move beyond S3.25 Assembly And Maintenance Manual

S3.25 Assembly and Maintenance Guide
19. Attach Surgical Tubing to
Top Beam
A. Attach the other end of the surgical tubing to the
Top Beam using
one 3¼-inch bolt
two washers
one ½-inch barrel spacer
one locknut
Wrench tighten.
CAUTION: Surgical tubing may cause injury if
allowed to snap back as you pull the rubber tubing
tightly.
Step 19. Attach Surgical Tubing to Top Beam
Top Beam
1 2 3
1 - 3¼" bolt
2 - washers
A
1 - ½" barrel spacer
1 - locknut
4 5 6
page 33