Troubleshooting The Comm Data Cable - Precor AMT12 Base Service Manual

Troubleshooting the COMM Data Cable

1 Remove the Consoles access cover.
2 Remove the right side cover as per procedure,
3 Disconnect the COMM Data cable from the upper PCA and the lower PCA.
4 External of the upper column, connect a replacement COMM Data cable to the lower PCA and the
upper PCA.
5 Check operation as described in
If the unit works properly, replace the interconnect cable.
6 If you have performed all of the procedures above and have been unable to correct the problem, call
Precor customer support.
© 2012 Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law
Cover Replacement.
Checking AMT Operation
Page 210 of 214