Assemble Chest Press Seat - Precor move beyond S3.25 Assembly And Maintenance Manual

S3.25 Assembly and Maintenance Guide

7. Assemble Chest Press Seat

A. Attach the Chest Press Upright to the Chest Press
Seat using
four ¾-inch bolts
four washers
Finger tighten.
B. Attach the middle hole at top of the Chest Press
Upright to the Main Upright using
one 3½-inch bolt
one washer
Finger tighten.
C. Attach the lower hole at the top of the Chest Press
Upright to the Main Upright using
one 3½-inch bolt
one washer
D. Attach the Chest Press Seat to the Chest Press
Base using
one 3-inch bolt
two washers
one locknut
Finger tighten.
E. Wrench tighten all bolts.
F. Attach the Prestretch Tube to the Main Upright
using
two 3½-inch bolts
six washers
Wrench tighten.
G. Wrench tighten all bolts.
Step 7. Assemble Chest Press Seat
Prestretch
Tube
Chest Press
Upright
Chest Press
Seat
1 2
4 - ¾" bolts
A
4 - washers
Chest Press Base
1 - 3" bolt
D
2 - washers
1 - locknut
3 4
2 - 3½" bolts
F
6 - washers
1 - 3½" bolt
C
1 - washer
1 - 3½" bolt
B
1 - washer
Main Upright
View from behind.
5 6
page 18