Air Outlet Selection - Fujitsu Inverter 9316796003-01 Operating Manual

Heat & cool model (reverse cycle) room air conditioner floor type
Table of Contents

Advertisement

AIR OUTLET SELECTION

With this function , air come out simultaneously from the upper and lower air outlets so that the room can be cooled or heated
effectively. This function is set using the switch behind the front grille of the Indoor unit. (This function is available in cooling
and heating operation.)
How to set to blow out air from the upper and lower air outlets
■ Set the air outlet selection switch to
Air blows out automatically from the upper and lower air
outlets as shown in the table below.
NOTE:
Set the air outlet selection switch to the end. Otherwise, air outlet cannot be selected as intended.
Description of operation
Operation
Air flow
Upper and lower
air flow
Room tempera-
ture and set tem-
perature are dif-
Conditions
ferent.
How to set to blow out air from the upper air outlet only
■ Set the air outlet selection switch to
11
COOLING Mode
Upper air flow
Room tempera-
ture is close to set
temperature, or
the air conditioner
has operated for
1hour.
DRY Mode
Upper air flow
Upper and lower
only
air flow
Air flow tempera-
ture is high.
_
HEATING Mode
Upper air flow
Air flow tempera-
ture is low.
(During defrost-
ing
operation,
start of operation,
etc.)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents