Air Outlet Selection - Fujitsu Inverter Operating Manual

AIR OUTLET SELECTION

With this function , air come out simultaneously from the upper and lower air outlets so that the room can be cooled or heated effec-
tively. This function is set using the switch behind the front grille of the Indoor unit. (This function is available in cooling and heating
operation.)
How to set to blow out air from the upper and lower air outlets
■ Set the air outlet selection switch to
Air blows out automatically from the upper and lower air outlets as shown in the table below.
NOTE:
Set the air outlet selection switch to the end. Otherwise, air outlet cannot be selected as intended.
Description of operation
Operation
Airfl ow
Upper and lower
airfl ow
Room temperature
and set tempera-
ture are different.
Conditions
How to set to blow out air from the upper air outlet only
■ Set the air outlet selection switch to
COOLING Mode
Upper airfl ow
R o o m t e m p e r a -
ture is close to set
temperature, or
the air conditioner
has operated for
1hour.
DRY Mode
Upper airfl ow only Upper and lower
airfl ow
Airflow tempera-
ture is high.
_
HEATING Mode
Upper airfl ow
Airflow tempera-
ture is low.
(During defrosting
operation, start of
operation, etc.)
En-11