Download  Print this page

Fujitsu Inverter 9316796003-01 Operating Manual page 16

Heat & cool model (reverse cycle) room air conditioner floor type
Hide thumbs

Advertisement

CLEANING AND CARE
Air Cleaning Filter Installation
1. Open the Intake Grille and remove the Air
filter.
2. Install the Air cleaning filter set (set of 2).
Set the air cleaning filter into the panel.
Catch it on five places of picks.
(Three places of upper parts and lower part two places.)
3. Install the Air filter and close the Intake
Grille.
● When air cleaning filters are used, the effect will increased
by setting the fan speed to "High".
15
Replace filters with the following components (purchased
separately).
● POLYPHENOL CATECHIN AIR CLEANING FILTER : UTR-FC03-2
● Negative air ions deodorizing filter: UTR-FC03-3
1. Open the Intake Grille and remove the Air
2. Replace them by two new Air cleaning
3. Install the Air filter and close the Intake
Air cleaning filter
POLYPHENOL CATECHIN AIR CLEANING FILTER (one sheet)
● The Air Cleaning Filters are disposable filters. (They can
● For storage of the Air Cleaning Filters, use the filters as
● Generally, the filters should be exchanged about every
Please buy delicated air cleaning filters (UTR-FC03-2) (Sold
separately) to exchange the used dirty air cleaning filters.
[Negative air ions deodorizing filter (one sheet) — light blue]
● The filters should be exchanged about every three years
Please buy delicated deodorizing filter (UTR-FC03-3) (Sold
separately) when exchanging the filters.
In order to maintain the deodorizing effect, please clean the
filter in the follow way once three months.
Replacing dirty Air cleaning filters
filter.
filters.
1 Remove the old air cleaning filters in reverse order of
their installation.
2 Install in the same way as for installation of the air
cleaning filter set.
Grille.
In regard to the Air Cleaning Filters
not be washed and reused.)
soon as possible after the package has been opened.
(The air cleaning effect decreases when the filters are left
in the opened package)
three months.
so as to maintain the deodorizing effect.
Maintenance of Deodorizing Filters
1 Remove the deodorizing filter.
2 Clean with water and dry in the air.
1) Flush the filters with high-pressure hot water until
the surface of the filters are covered with water.
Please flush with diluent neutral detergent.
Never wash by reaming or rubbing, otherwise it
will damage the deodorizing effect.
2) Rinse with water flow.
3) Dry in shade.
3 Reinstall the deodorizing filter.

Advertisement

loading

  Related Manuals for Fujitsu Inverter 9316796003-01