Fujitsu Inverter 9318657012 Operating Manual page 5

Compact wall mounted type
Table of Contents

Advertisement

NAME OF PARTS
Fig. 1 Indoor Unit
1 Operating Control Panel (Fig. 2)
2 MANUAL AUTO button
When the MANUAL AUTO button is
pressed in for more than 10 seconds, the
forced cooling operation will start.
The forced cooling operation is used at
the time of installation.
Only for authorized service personnel's
use.
When the forced cooling operation starts
by any chance, press the START/STOP
button to stop the operation.
● Please press the button at
DICATOR RESET
3 Indicator (Fig. 3)
4 Remote Control Signal Receiver
5 OPERATION Indicator Lamp (green)
6 TIMER Indicator Lamp (orange)
If the TIMER indicator lamp À ashes when
the timer is operating, it indicates that a
fault has occurred with the timer setting
(See page 13 "AUTO Restart".)
7 ECONOMY Indicator Lamp (green)
ECONOMY indicator lamp lights when
ECONOMY OPERATION is operating.
8 SUPER QUIET Indicator Lamp (green)
9 Intake Grille (Fig. 4)
0 Front Panel
A Air Filter
B AirÀ ow Direction Louver
C Right-Left Louver
(behind AirÀ ow Direction Louver)
D Drain Hose
E Air Cleaning Filter
F Remote Controller (Wired/Option)
FILTER IN-
Fig. 5 Remote Controller
G Signal Transmitter
H MODE button
I ECONOMY button
J SLEEP button
K TIMER MODE button
L FAN button
M START/STOP button
N SET button (Vertical)
O SWING button
P SET TEMP. button (
Q TIMER SET (
/
R CLOCK ADJUST button
S TEST RUN button
● This button is used when installing the air
conditioner, and should not be used un-
der normal conditions, as it will cause the
indoor unit's thermostat function to oper-
ate incorrectly.
● If this button is pressed during normal op-
eration, the indoor unit will switch to test
operation mode, and the Indoor Unit's
OPERATION Indicator Lamp and TIMER
Indicator Lamp will begin to À ash simulta-
neously.
● To stop the test operation mode, press
the START/STOP button to stop the air
conditioner.
T RESET button
U Remote Controller Display (Fig.6)
V Temperature SET Display
W Operation Mode Display
X SLEEP TIMER Display
Y Transmit Indicator
Z Fan Speed Display
[ SWING Display
\ Timer Mode Display
] Clock Display
/
)
) button
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents