ADJUSTING THE DIRECTION OF AIR CIRCULATION
Vertical (up-down) direction of airÀ ow is adjusted by pressing the Remote Controller's SET button. Horizontal (right-left) airÀ ow direc-
tion is adjusted manually, by moving the AirÀ ow Direction Louvers.
Whenever making horizontal airÀ ow adjustments, start air conditioner operation and be sure that the vertical air direction louvers are
Vertical Air Direction Adjustment
Press the SET button (Fig. 5 N ).
Each time the button is pressed, the air direction range will change as follows:
Types of AirÀ ow Direction Setting:
1, 2, 3 : During Cooling/Dry modes
1, 2, 3, 4, 5, 6 : During Fan mode
The Remote Controller's display does not change.
● Use the air direction adjustments within the ranges shown above.
● The vertical airÀ ow direction is set automatically as shown, in accordance with the
type of operation selected.
During Cooling/Dry mode : Horizontal À ow 1
● During AUTO mode operation, for the ¿ rst a few minutes after beginning operation,
airÀ ow will be horizontal 1; the air direction cannot be adjusted during this period.
Adjust the Right-Left louvers.
Move the Right-Left louvers to adjust airÀ ow in the direction you prefer.
Never place ¿ ngers or foreign objects inside
the outlet ports, since the internal fan operates
at high speed, and personal injury could be
● Always use the Remote Controller's
SET button to adjust the vertical airÀ ow
louvers. Attempting to move them
manually could result in improper
operation; in this case, stop operation
and restart. The louvers should begin to
operate properly again.
● During use of the Cooling and Dry
modes, do not set the AirÀ ow Direction
Louvers in range (4–6) for many hours,
since water vapor may condense near
the outlet louvers and drops of water
may drip from the indoor unit. During the
Cooling and Dry modes, if the AirÀ ow
Direction Louvers are left in range 4–6
for more than 30 minutes, they will
automatically return to position 3.
● When used in a room with infants,
children, elderly or sick persons, the
airÀ ow direction and room temperature
should be considered carefully when
When adjusting the Right-Left Louvers, it
is necessary to stop the Vertical (up-down)
louvers first and make sure that it stops
completely before adjusting the direction.