Begin air conditioner operation before performing this procedure.
To select SWING Operation
Press the SWING button (Fig. 5 O ).
The SWING Display (Fig. 6 [ ) will light.
In this mode, the AirÀ ow Direction Louvers will swing automatically to direct the airÀ ow
both up and down.
To stop SWING Operation
Press the SWING button (Fig. 5 O ) once again.
The SWING Display (Fig. 6 [ ) will go out.
AirÀ ow direction will return to the setting before swing was begun.
About Swing Operation
During cooling/Dry mode
The SWING operation may stop temporarily when the air conditioner's fan is not operating, or when operating at very low speeds.
Begin Air Conditioner operation before performing this procedure.
To Use the ECONOMY Operation
Press the ECONOMY button (Fig.5 I ).
The ECONOMY indicator Lamp (green) will light.
ECONOMY operation begins.
To Stop the ECONOMY Operation
Press the ECONOMY button (Fig.5 I ) again.
The ECONOMY Indicator Lamp (green) (Fig. 3 7 ) will go out.
Normal operation begins.
About ECONOMY Operation
At the maximum output, ECONOMY Operation is approximately 70% of normal air conditioner operation for cooling.
● If the room is not cooled well during ECONOMY operation, select normal operation.
● During the monitor period in the AUTO mode, the air conditioner operation will not change to ECONOMY operation even if
ECONOMY operation is selected by pressing the ECONOMY operation button.
● When ECONOMY operation mode is operated, the room temperature will be little higher than the set-temp under cooling mode.
Therefore, the ECONOMY mode is able to save more energy than other normal mode.
: Swings between 1 and 3.
● Indicator Lamp