Installation Without Using Stands (Direct Floor Installation) - Pioneer RM-V2550 Manual

INSTALLATION AND ASSEMBLY

(3) Installation without using stands (Direct floor installation)

For installation of this system, we basically recommend the use of our recommended stands or other stands
equipped with adjusters and casters.
Nevertheless, if you should install the system directly on the floor, use the following caution in installation.
[1] If the floor is flat, the cabinets cannot be joined well and may be deformed after joining.
To prevent this, be sure to install the cabinets on a flat, level floor. (See Chapter 3, 1(1).)
[2] The installation method is the same as for when stands are used.
[3] Be sure to take measures against tumbling down of the system. (See Chapter 3, 1(6).)
[4] Take the maintenance space that is required on the rear in consideration during installation.
72