Pioneer RM-V2550 Manual page 104

ADJUSTMENTS
5, 6, 7, Point convergence adjustment
Position of adjustment
point on screen
¶ In point convergence adjustment, the 25 points set on the screen can be adjusted individually.
In addition, the area (total ten areas of five lines and ranks) of the four sides of the screen can be adjusted.
Notes
¶ The adjusting points set by the circuit are fixed at the positions shown in the figure. In some cases, the
OSD display may deviate. But the actual adjusting points are as shown in the figure.
¶ Deviation between two adjusting points will naturally be corrected when the deviation of each point is
corrected.
94