Pioneer RM-V2550 Manual page 19

Power Supply Panel
No. Name
1 AC inlet
2 AC outlet
Main power switch Seesaw switch
3
4 Fuse holder
NOTE) 1. Refer to "(13) Power supply 3 connection".
[Fig. 2-1-1]
Type
Connect the power cord here.
Connect other multi projection units here. Not linked to main
power switch. (*1)
Turns the power supply to the set on and off. When on, the set
is set to the mode stored in the last memory (standby or
power on).
The fuse is in here. Only service personnel should touch this.
GENERAL SPECIFICATIONS
Function
9