Pioneer RM-V2550 Manual page 48

Multi projection unit / projection screen kit / multi video processor / projection stand
Table of Contents

Advertisement

INSTALLATION AND ASSEMBLY
¶ Do not stand the screen frame ass'y in the 2-
stage or 3-stage configuration against a wall. The
ass'y should be mounted on the cabinet as soon
as it has been assembled.
2 Cabinet
¶ The cabinet must always be carried by being
lifted up more than one person.
Never attempt to move the cabinet by sliding it
on the floor.
¶ When carrying the cabinet, each person should
hold it by the grip and the step position on the
front. Also make sure that the center of gravity is
located on the rear side during carrying. [Fig. 3-2-
6]
WARNING
¶ Never attempt to lift or suspend the cabinet by
hooking the holes on it with a crane, etc. This is
extremely dangerous because these holes are
not strong enough to withstand the crane car-
riage.
Should an accident occurs as a result of an at-
tempt to carry the cabinet with a crane, we can-
not assume liabilities for resulting damages.
[Fig. 3-2-7]
38
[Fig. 3-2-5]
Center of
gravity
Step position
[Fig. 3-2-6]
Never hang the cabinet by the holes indicated
by arrows.
[Fig. 3-2-7]
Grip

Advertisement

Table of Contents
loading

Table of Contents