Pioneer RM-V2550 Manual page 23

[RGB-1 terminal]
M2.6 inner thread screw
[VIDEO input]
The video output terminal outputs the signal input to the input terminal (through out). When connecting other
devices, terminate the other device at 75 ohm and set the unit's 75-ohm terminating switch to "OFF " (open).
When not connecting other devices, always set the terminating switch to "ON".
Power outlet
¶ Power outlet (unswitched)
RM-V2550BU ...... MAX. 8A/AC 100V to 120V
RM-V2550E ......... MAX. 550W/AC 220V to 240V
This outlet is for adding multi projection units. Do not use it for other purposes.
¶ Power outlet power consumption
Up to two other multi projection units can be connected after one multi projection unit.
AC OUTLET »
UNSWITCHED
AC100-120V 8AMAX
50/60Hz
RM-V2550BU
GENERAL SPECIFICATIONS
Analog RGB : 0.7 Vp-p (75 ohm)
Synchronizing signal : 0.3 Vp-p to 4 Vp-p (75 ohm)
Connection terminal : 9-pin D SUB (male)
Pin layout 1 : R
2 : G/G on Sync
3 : B
4 : Signal GND
5 : HD/Sync
AC OUTLET »
UNSWITCHED
AC220-240V~ 550W
RM-V2550E
6 : GND
7 : VD
8 : NC
9 : NC
13