Pioneer RM-V2550 Manual page 22

GENERAL SPECIFICATIONS
Control Panel Mode Switches
¶ INPUT SELECT switch
¶ The input switches each
time the switch is pressed.
¶ STATUS indicator switch
Display example)
1.HOUR
2.INPUT
3.MULTI
4.COLOR MODE
5.COMBI.
6.VIDEO MODE
7.BAUD RATE
8.TV SYSTEM
9.CONV. DATA
12
Position
VIDEO Selects the VIDEO input terminal. When selected, the VIDEO LED
lights. This position is also used for switching the input between
VIDEO and Y/C by inputting a control signal to the EXT. CON-
TROL terminal.
< EXT. CONTROL >
The input switches between VIDEO and Y/C when a control sig-
nal is input to the EXT. CONTROL terminal (BNC).
In this case, the VIDEO LED remains lit, regardless of which input
is selected.
Control signal Open : VIDEO
When the control input terminal is open (normal mode), the
open mode is set and the VIDEO input signal is selected.
Y/C The Y/C input terminal is selected.
When selected, the Y/C LED lights.
RGB The RGB input terminal is selected.
When selected, the RGB LED lights.
¶ The display of the various settings turns on and off when the
switch is pressed.
1000 H
VIDEO
ON
1
ON
ON
4800BPS
AUTO/NTS
MEMO-1
Function
Low : Y/C
1: Indicates the total power on time. (Only counted
when power is set to ON.)
2: Indicates the selected input.
3: Indicates the MULTI ON/OFF mode.
4: Indicates the COLOR MODE 1/2 mode.
5: Indicates the COMBINATION ON/OFF mode.
6: Indicates the picture muting on/off mode when
the input function is switched.
7: Indicates the transfer speed for computer con-
trol.
8: Indicates the TV system mode.
9: Indicates the memory area status for the selected
convergence data.