Pioneer RM-V2550 Manual page 145

31)
DISP CALL
<Adjustment Mode>
• In the deflection adjust mode, switches cyclically, as follows:
= Normal adjustment item = Main deflection adjustment setting table = Test cross
NOTES) ¶ The set operates as follows when the above is displayed:
• No key is pressed = Adjustment mode is canceled after about 180 seconds.
• "MAIN MENU" or "ADJ IN" pressed = Main menu reappears.
• "ADJ OUT" pressed = Adjustment mode is canceled.
• Any key from "0" to "D" pressed = Main deflection adjustment mode corresponding to that
key is set.
¶ The adjustment settings cannot be changed when the above adjustment settings are displayed.
• In the convergence adjust mode, the test cross is turned on.
= Adjustment item = Test cross
• In the white balance adjust mode, switches in the following cycle:
= Normal adjustment = White balance adjustment setting = White balance adjustment setting
item
(see below)
Main deflection adjustment setting table
0. V STATIC
2. V SIZE
3. V M SIZE
5. H SIZE
6. V LI
7. H BLK-L
8. H BLK-R
9. V M LIN
B. H PIN
D. GH LIN
Remote control
unit key number
Main deflection
adjustment setting
table (1) (see next page)
128 (G128)
128 (G128)
128 (G128)
128 (G128)
128 (G128)
128 - - -
128 - - -
128 (G128)
128 (G128)
G128
This item (convergence GH LINEARITY) alone
can be selected and adjusted directly from
this menu. Other convergence data (adjust-
ment items within (G***)) cannot be selected
directly from this menu.
table (2) (see next page)
ADJUSTMENTS
Convergence green
adjustment settings
corresponding to the
various main deflec-
tion adjustments
135