To Perform Ntsc Input Board Picture Quality Adjustment; To Set The Adjustment Mode [Ajyc Command]; To Exit The Adjustment Mode [Ajn Command] - Pioneer RM-V2550 Manual

*6 : Display of remote and manual states
REMOTE MODE
MANUAL MODE
*7 : Slot number
*8 : Type of input board
NTSC BOARD
V.SCAN BOARD
NO BOARD
*9 : NTSC input board state
STANDARD MODE
NO STANDARD MODE : When non-standard NTSC signal is input
*10: Display of VBS/ Y/C select switch state
VBS
Y/C
*11: Type of output board
4 OUT BOARD
NO BOARD

5. To perform NTSC input board picture quality adjustment

(1) To set the adjustment mode [AJYC command]

(2) To exit the adjustment mode [AJN command]

Input: AJYC , AJN
Explanation: AJYC command : Sets the NTSC input board to the adjustment mode.
AJN command
• When adjusting the NTSC input board, the adjustment command will be ignored if AJYC is not
executed.
* To set the optional variable scan board to the adjustment mode:
: Remote state
: Manual state
: NTSC input board
: Variable scan board (option)
: No input board is incorporated
: When standard NTSC signal is input
: Composite video signal input (Indicates V FIL.ON for the V.SCAN BOARD)
: Y/C separation signal input (Indicates V FIL.OFF for the V.SCAN BOARD)
: 4 output board
: No output board is incorporated
: Exists the adjustment mode.
: Use the :A command. (Refer to page 171 and on.)
MVP MANUAL
165