Pioneer RM-V2550 Manual page 148

Multi projection unit / projection screen kit / multi video processor / projection stand
Table of Contents

Advertisement

ADJUSTMENTS
2
Performing adjustments
1) Entering and exiting the adjustment mode
Turn on the power switch and press the two
mode will be set.
To exit this mode, press the
2) Using the adjustment mode
The following main menu will be displayed when the adjustment mode is entered.
1.ID SET/CLEAR/SELECT
2.OPERATION MODE
3.DEFLECTION ADJ
4.CONVERGENCE ADJ
5.POINT CONVER ADJ
6.WHITE BALANCE ADJ
7.MEMORY READ/COPY
¶ Main Menu
1) ID SET/CLEAR/SELECT mode
Used for selecting, setting and clearing the ID.
2) OPERATION mode
Switches the setting such as input selection, ABL linkage ON/OFF, etc.
3) DEFLECTION ADJ mode
Adjusts the main deflection size, etc. (But all three colors RGB at once except GH LINEARITY.)
4) CONVERGENCE ADJ mode
Adjusts the convergence. (R, G, and B can be adjusted individually.)
5) POINT CONVER ADJ mode
Adjusts the convergence by point and zone convergence. (R,G,and B can be adjusted individually.)
6) WHITE BALANCE ADJ mode
Adjusts the white balance, color.
7) MEMORY READ/COPY mode
Adjusts the current value (both convergence and white balance) to the value set at shipment, and copy the
convergence data between the memories.
138
keys of the remote control together. The adjustment
ADJ IN
key of the remote control. The normal screen will return.
ADJ OUT
ADJUST

Advertisement

Table of Contents
loading

Table of Contents