Toshiba 24SLV411U Owner's Manual page 303

VOLUME anti MUTE controls of Audio
Receiver
With your TV's remote control, you can adjust or
mute the sound volume of the Audio Receiver.
• _] / v__ adjust the volume level.
MUTE
" O turns off the sound.
No te:
° To use this function.
- Set Speaker Preference to Audio Receiver in
the REGZA-LINK Setup menu.
_ Confirm that a connected REGZA-LINK ® device
(such as DVD player, etc) is selected for the
Audio Receiver input soume.
° You can also use this function when the audio
receiver is connected to the TV's DIGITAL
AUDIO OUT terminal (not HDMI connection).
In this case, select a digital audio input mode
on the Audio Receive_
o These functions depend on the device
connected.
Other REGZA-LIHR ® functions
When the Enable REGZA-UNR and each item in the
REGZA-UNR Setup menu are set to 0u, the following
functions will be enabled.
Note: When you turn on the Audio Receiver,
change its input source or adjust the sound
volume, the sound will be output from the audio
receiver's speakers even if TV Speakers has
been selected. Turn the TV off and on again to
output the sound from the TV speakers.
To set the REGZA-LINK ®Setup:
1 From the Setup menu, highlight REGZA-LNK
Setup and press @.
2
Press A or V to highlight Enable REGZA-LINK
3 Press "9 or _ to select 0U.
Note: If you select Enable REQZA-UN!( Off, the
other items will be grayed out.
4 Press A or V to highlight the REGZA-LiNRSetup
item you want to use, and press 4 or _ to select
0u or desired mode.
* TV Auto [nput Switch: On/Off
* TV Auto Power: On/Off
. Device Auto Standby: On/Off
. Speaker Preference: TV Speakers/Audio Receiver
5 To save the new settings, highlight [}0ue and press
@. To revert to the factory defaults, highlight
Reset and press @.
If a connected HDMI device starts
TV Auto playing video or audio,the TV will
[nput Switch automatically switch to the appropriate
HDMI input.
TV Auto If a REGZA-LINK®&vice is turned
Power on, theTV turns on auk_matically.
If the TV is tumexloff'the TV will send
Device Auto
a message to turn off'all of the REGZA-
Standby LINK ®devices connected to theTV.
Speaker
Preference
From this item, you can set your audio
output preference to the TV speakers
or the audio receiver speakers. When
this item is set to Audio Receiver,
the TV remote can be used to adjust
or mute the volmne of the audio.
This item will be grayed out unless
a REGZA-L[NK ®compatible audio
receiver is connected.
51