Toshiba 24SLV411U Owner's Manual page 137

Usingthe advanced picture
settings features
UsingDynamicContrast
Dynamic Contrast detects changes in picture quality
that affect the appearance of your contrast settings
and then automatically adjusts the video.
To select Dynamic Contrast preference:
1 From the the
Picture
menu, highlight
Picture
Settings
and press @).
2 Highlight
Advanced Picture S ettings
and press @.
3 Press ,A. or V" to select
Dynamic Contrast.
4 Press "_ or _ to select
High,Middle,
Low aM Off.
Usingthe Static Gammafeature
The Static Gamma feature allows you to adjust the
levels of black in the picture.
To adjust the Static Gamma settings:
SETUP
Press @ and open the
PEctnre
m enu.
2
Highlight
Picture Settings
and press @.
3 Highlight
AdvancedPictureSettings
and press @.
* [n the Static Gamma field, press "9 or _ to
adjust the Static Gamma.
The adjustment range is within _+5 from center.
. if the setting is moved in the minus direction,
the detail of black colors will be decreased.
. if the setting is moved in the plus direction, the
detail of black colors will be increased.
4. To save the new settings, highlight Done and
press @.
To revert the factory defaults, highlight Reset
and press @.
Note: If you select one of the factory-set
picture modes (Sports, Standard, Movie
or PC) and then change the Static Gamma
setting, the picture mode automatically
changes to Preference.
Selecting the ColorTemperature
You can change the quality of the picture by selecting
from three preset Color Temperatures (Cool,
Medium, and Warm), as described below.
Cool blueish
Medium neutral
Warln reddish
To select the Color Temperature:
SETUP
1
Press _ and open
the Picture menu.
2 Highlight
Picture Settings
and press o@.
3
Highlight
Advanced Picture Settings
and press _).
4' Highlight C0J0r
Temperature
and press @.
5 in the C0Jer
Temperature
f ield, press "9 or _ to select
the m_.te you prefer (Coo[,
Medium,or Warm).
Press A or V to select either [3
Driveor GDrive,
and then press "9 or _ to adjust the settings.
• B Drive: _ makes the picture blueish.
• G Drive: _ makes the picture greenish.
Note: The B Drive and G Drive settings
are connected to the Color Temperature
settings and will change based on which
setting is selected in step 5 above.
7
To save the new settings, higlalight Done and press @.
To revert to the factory defaults, highlight Resel and
press @.
Note: If you select one of the factory-
set picture modes (Sports, Standard,
Movie, or PC) and then change the Color
Temperature mode, the picture mode
automatically changes to Preference.