Toshiba 24SLV411U Owner's Manual page 227

EnablingA-B repeat mode (DVD/VCD/
CD)
REPEAT A-B
1 During playback, press _ at the point where
you would like the playback loop to begin. This
sets your "A" point.
2 When the playback reaches the point where you
REPEAT M3
would like the playback loop to stop, press
again. This sets your "B" point.
The section between points A and B will be
played repeatedly in a loop until you turn off the
Repeat A-B mode.
To resume normal playback:
REPEATA_
Press _ until _ Off aF_pears on-screen.
No te:
o /n some cases, subtitles for the repeated
scene may not displa_
o The A-B repeat mode may not apply to some
D VD scenes.
o TheA-B repeatmode is notapplicable to
interactive DVDs and JPEG CDs.
Programmedplayback/Random
playback
You can program the playback sequence of tracks
on a Video CD. Or you can set the LCD TV / DVD
combination to play tracks at random.
For procedures applicable to audio CD / MP3 /
WMA / JPEG, go to page 62.
No te:
o The programmed and random playback
modes are not applicable to PBC-enabled
Video CDs.
o The programmed and random playback
modes are only applicable during the current
session. Once you eject the disc or turn off
the LCD TV/ DVD combination, these modes
will be disabled.
Programming the playbacksequence
(VCD)
1 Press PLa(_DEin stop mode.
Press A or V to select Mode, then press @
Repeatedly to select
Program.
3 Press "9 or _ to go to the right column. Press A
or V to select the playback position, then use the
Channel Number buttons (0-9) to input the track
for that position.
To program other tracks, repeat this step.
C_C_k
If you input a wrong number, press @ .
4. Press 4 or _" to return to the left column, then
press ,A. or Y to select
Program Playback
and
press @.
Track playback will follow the sequence you set
in step 3.
(comin ued)
59