Toshiba 24SLV411U Owner's Manual page 184

Connectinga DVDplayer with
ColorStream ®(componentvideo)
Connectinga sateJJitereceiver
From satellite dish
DVD player with
component video
Satellite receiver with
component video
You will need:
•
standard audio cables
•
component video cables
_ You can connect the component video
cables (plus audio cables) from the DVD
player to the COLOR STREAM HD terminal
on the TV. The COLOR STREAM HD
terrninal can be used to display Progressive
(480p, 720p) and Interlaced (480i, I080i).
Please check the Owner's Manual of the
DVD player in order to determine the best
output signal available.
_ If your DVD player does not have component
video, connect a standard A/V cable to
AUDIO/VIDEO terminal. If your DVD player
has HDMI video, see page 17.
To view tile DVD player:
Turn ON the DVD player. Select the ColorStream
HD video inl:_Ut s ource on the TV.*
* To select the video input source, press _ on the
remote control (_ page 30).
You will need:
standard audio cables
component video cables
_ You can connect the component video
cables (plus audio cables) from the satelfite
receiver to the COLOR STREAM HD
terminal on the TV. The COLOR STREAM
HD terminal can be used to display
Progressive (480p, 720p) and Interlaced
(480i, 1080i). Please check the Owner's
Manual of the satelfite receiver in order to
determine the best output signal available.
_ If your satellite receiver does not have
component video, connect a standard A/V
cable to AUDIO/VIDEO terminal.
To view satellite programs using the
component video connections:
Turn on the satellite receiver. Select the ColorStream
HD video input source on the TV.*
* To select the video input source, press _ on the
remote control (_ page 30).
The unauthorized recording, use, distribution,
or revision of televisionprograms,videotapes,
DVDs, and other materials is prohibitedunder
the Copyright Lawsof the United States and
othercountries,and may subject you to civil and
criminal liability,
16