Toshiba 24SLV411U Owner's Manual page 213

Using the panel lock feature
You can lock the control panel to prevent your
settings from being changed accidentally (by
children, for example). When the Panel Lock is On,
none of the controls on the TV control panel will
operate except
POWER.
To lock the control panel:
1
Press s_p and highlight the Locks menu icon.
2 Press V to display the PIN code entering screen.
3 Enter your four-digit PIN code and press @.
4 Press V to highlight
Panel Lock.
5 Press _ to select On. When the control panel
is locked and any button on the control panel
(except POW'F[q) is pressed, the message "NOT
AVAILABLE" appears.
To unlock the control panel:
Select Off in step 5 above, or press and hold the
VOL[JNF - button on the TV control panel for about
10 seconds until the volmne icon appears.
Usingthe PCsettings feature
You can view an image from a PC on the TV screen.
When a PC is connected to the TV's PC IN terminal,
you can use the PC Settings feature to make
adjustments to the image. If the edges of the picture are
cut off, readjust the
Horizontal Position
and Vertical
P0sili0n. If the picture is affected by interference,
readjust the CJock Phase and
SamplingClock.
To adjust the PC settings:
1 Repeatedly press _ to select PC input mode (_:_
"Selecting the video input source to view" page 30).
Press
s_)p and open the Setup menu.
3
Highlight
PCSettings
and press @.
Note:/fa PC is not connected or there is no
pc input signal this feature will be grayed
out in the Setup menu.
4 Press A or W to highlight the item you want to adjust.
5 Press 4 or _ to make the appropriate adjustments.
Note: The screen is disrupted momentarily
when adjusting the PC settings. This is not a
sign of malfunction.
Horizontal Moves the picture leftMght. The adjustment
Position range is within _+10 from centel:*
Vertical Moves the picture upMown. The adjustment
Position range is within _+10 from centel:*
Clock Helps to reduce noise and sharpen the
picture. The adjustment range is within
Phase _+ 16 from center.*
Helps to reduce noise and minimize
Sampling periodic vertical stripes on the screen.
Clock The adjustment range is within _+10
from center.*
Reset Highlight this item then press @ to get
an optimum adjustment automatically.
* The default settings may vary depending on
the input signal format.
Setting the PC Audio
This function allows you to output or mute the sound
from your PC when connecting using the PC IN
terminal and an analog RGB cable. (_:_ page 20)
To set the PC Audio:
1
Press s_, and open
the Sonnd menu.
Highlight AUdiO Setup and press @.
Press A or V" to select
PCAudi0
and then press
"9 or _ to select N0 or Yes.
Yes: When viewing the PC input, the audio from
the PC Audio input can be heard.
No: When viewing the PC input, there will be no audio.
Note: Because the PC and HDMI- 7 inputs
share the same set of analog audio inputs,
the PC Audio menu setting influences the
HDMI 1 Audio menu setting. If PC Audio
is set to "No" the HDM! 1 Audio setting
changes to "Auto" If PC Audio is set to "Yes"
the HDM! 1 Audio setting is set to "Digital"
and is grayed out in the menu. (Also see
item 3 on page 13 and "Setting the HDMi _
audio mode" on page 28.)
45