Using The Auto Aspect Ratio Teature; Scrolling The Theaterwide Picture (Theaterwide 2 And 3 Only) - Toshiba 24SLV411U Owner's Manual

iiiii ;i iiiiiiiiiiii;! i!!i!!i!i!i!iiiiiiiiiii
4:3
Nee
To set the scroll settings:
1 Press s_P and open the Picture menu.
Highlight
Theater Settings and press _).
00
O0
Some program formats will display with sidebars
and/or bars at the top and bottom.
Normal
(for VGA, SVGA,XGA, WXGA,and SXGA
sources and Photo files}
°°
OO OOO
"Normal" is a non-stretched display. Some input
signal _ormats will display with sidebars and/or bars
at the top and bottom.
Dot by [lot
(for VGA, SVGA,XGA, WXGA,and SXGA
sources only}
The "Dot by Dot" picture is non-scaling display.
Depending on the input signal formats, picture is
displayed with sidebars and/or bars at the top and
bottom. (Example: VGA input source)
3 In the Picture Size field,
select either
TheaterWide 2 or TheaterWide 3 (you cannot
scroll in any other mode).
Press _ to highlight the
Picture Scroll
field.
5 Press _ or _ to scroll the picture up and down as
needed.
[} To save the new settings, highlight D0ue and
press o@. To revert to the factory defaults,
highlight Reset and press o@.
Note: When receiving a signal at 480i
resolution, the picture scroll function may have
limited adjustment range.
Usingthe auto aspect ratio feature
When the auto aspect ratio feature is set to 0U, the
TV will automatically select the picture size when
one of the following input sources is received:
* A 480i, 480p, 720p or 1080i digital signal from the
ANT/CABLE input
. A 480i signal from the
VIDEO, C010rStreamlid
or
[}V[} input
* A 480i, 480p, 720p, 1080i, 1080p orVGA (60Hz)
signal from the
HDIVli 1/2
input
,:: To view the hidden areas (such as subtitles or
captions), see below "Scrolling the TheaterWide ®
picture".
Scrolling the TheaterWide® picture
(TheaterWide2 and 3 only)
You can set separate scroll settings t_r the TheaterWide 2
and TheaterWide 3 modes fur each input.
4:3 normal 4:3
4:3 letter box TheaterWide 2
16:9 full Full
Not defined (no The current picture size you
[D-I data or set under "Selecting the
HDM[ aspect data) picture size" on page 34.
Note: The auto aspect ratio feature is not
applicable to PC input.
(con fin u_,d)
36