Connectinga Digital Audio System - Toshiba 24SLV411U Owner's Manual

Integrated high definition lcd tv/dvd combination
Hide thumbs Also See for 24SLV411U:
Table of Contents

Advertisement

Connectinga digital audio system
The TV's
DiGiTAL AUDIO OUT terminal
outputs
a
Dolby <_"Digital
m OOLB_o,_ifAL
IOl"2-channel
down-mixed
PCM
(Pulse-Code
Modulation)
signal
for use with
an external
Dolby °_ Digital
decoder
or other external
audio
system
with optical
audio
input.
You will need:
,_ Optical audio cable (Use an optical audio cable
that has the larger "TosLink" connector and not
the smaller "mini-optical"
connector.)
DolbyDigital d ecoderor
-_
other digital audio system _-_
To control
the audio:
1 Turn on the TV aM the digital audio device.
2
Press s_P on the remote control and open the Sound
n'lellu.
Press A or V to select Audio Setup and then press
@
Press "9 or I_"to select either Dolby Digital or PCM,
depending on your device.
(_ "Selecting the optical audio output format" on page
4o).
To save the new settings,
highlight
Done and then
press @.
To revert to the factory
defaults,
highlight
Reset
and then press o@.
No te:
Some audio systems may not be compatible
with Dolby Digital bitstream signals. Older
audio systems that are not compatible
with
standard optical out signals may not work
properly, creating a high noise level that
may damage speakers or headphones.
THIS DAMAGE IS NOT COVERED BY YOUR
WARRANTX
,, The DIGITAL AUDIO OUT terminal may not
output some digital audio sources because
of copy restrictions.
* Manufactured
under license from Dolby
Laboratories.
Dolby, and the double-D
symbol are
trademarks
of Dolby Laboratories.
4
Press A or Y to select Optical Output Format.
19

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

32slv411u19slv411u

Table of Contents