Toshiba 24SLV411U Owner's Manual page 114

Selecting the video input source
to view
To select the video input source to view:
1 Press _ on the remote control or TV control
panel.
2 And then either:
a) Dess 0-6 ; or
b) Repeatedly press &V on the remote control
and then press @ to change the input; or
c) Repeatedly press _ oll the remote control
or TV control panel to change the input,
The current signal source displays in the top right
corner of the Input Selection screen.
No to:
. You can label the video input sources
according to the specific devices you have
connected to the TV (_ "Labeling the video
input soumes" at right).
° Sources can be "hidden" (_ "Labeling the
video input soumes" at right).
° "No video signal" will appear randomly on the
screen if no signal is received in video input
mode.
° If CEC device is connected to an HDMI input,
the REGZA-LINK ® icon will appea_
If a REGZA-LINK ®device with HDM!
switchhlg capability (e.g. Audio Receiver) is
connected to the HDMI input:
Press _ on the remote or TV control panel
repeatedly to highlight IIDMI 1 or It[}MI 2.
[f the connected CEC device has any connected
devices, a separate device selection popup window
will appear.
Press _ repeatedly to highlight the desired input
source, and then press c_E.
Note:
. When selecting REGZA-L/NK ® input sources
from the popup window using _, some
REGZA -L INK® de vices may a utoma tically turn
on.
° When selecting input sources using & V,
you will have to press o_ to actually select a
particular device from the popup windo_z
Labelinothe video input sources
You can label each video input source according to
the type of device you connected to each source,
from the following preset list of labels:
• - - (d@adr label)
• Audio Receiver
• Cable
• Compact Disc
• DTV
• DVD
• Game Console
• HDM[ Switch (HDM[ inputs only)
• Laser Disc
• Satellite/DSS
• VCR
• Video Recorder
• Hide (to hide an unused input in the input Selection
screen and in the Channel BrowseP" [nputs list)
Note: If you select PC in the Input Selection
screen, you can choose only "- -", "Game
Console", or "Hide" as the label.
To label the video input sources:
1 Press s_P and open the Preferences menu.
Highlight Inpnl Labeling and press o@.
(comin *_ed)
3O