Setting Up As A Remote Printer (Netware 3.X) - Lanier LD225 Network Manual

Using a Printer Server
R
In the [Class of new object] box, click
[Print Server], and then click [OK]. For
NetWare 5, click [Print Sever (Non
NDPS)].
S
In the [Print Server Name] box, enter
the print server name.
Use the same print server name
specified using NIB Setup Tool.
T
Select the [Define additional proper-
3
ties] check box, and then click
[Create].
U
Click [Assignments], and then click
[Add] in the [Assignments] area.
V
In the [Available objects] box, click
the queue you created, and then
click [OK].
W
Check the settings, and then click
[OK].
X
Start the print server by entering
the following from the console of
the NetWare server.
If the print server is in operation,
quit and restart it.
❖ To exit
CAREE: unload pserver
❖ To start
C A R E E : l o a d p s e r v e r
print_server_name
Setting Up as a Remote Printer
(NetWare 3.x)
Follow the procedure below to use
the machine as a remote printer un-
der NetWare 3.x.
If TCP/IP and IP address is set, con-
figure using Web Image Monitor.
If IPX is set, configure using NIB Set-
up Tool.
60
Setting up using NIB Setup Tool (TCP/IP)
A
Log on to the file server as a su-
pervisor or supervisor equivalent.
B
Start NIB Setup Tool from the
[Start] menu.
C
Click [Property Sheet], and then
click [OK].
D
Select the printer you want to con-
figure, and then click [Finish ].
A dialog box prompting you to
perform the remaining configura-
tion tasks in the Web browser ap-
pears. Click [OK], and then wait
until Web Image Monitor starts au-
tomatically.
E
A dialog box for entering the [User
Name] and [Password] appears.
Enter the user name and pass-
word, and then click [OK].
Note
❒ For details about the password,
consult your network adminis-
trator.
F
Click [Configuration] in the left ar-
ea, click [Network], and then click
[NetWare].
Note
❒ For details, see p.53 "Setting Up
as a Print Server (NetWare
3.x)".
G
Confirm the settings, and then
click [Apply].
Configuration is now complete.
Wait several minutes before re-
starting Web Image Monitor.