Lanier LD225 Network Manual page 54

Connecting and Setting Up
To enter the user name and password
When [On] or [High Security] is selected
for the authentication setting, use the
administrator account name and
password. Do not enter the adminis-
trator account name and password
2 when using authentication for each
individual or each search.
A
Press [TNext].
B
Press [Change] under [User Name].
C
Enter the user name, and then press
[OK].
Note
❒ Procedures for the user name
setting differ depending on
server environment. Check
your server environment before
making the setting.
• Example setting procedures:
Domain Name\User Name
User Name@Domain Name
CN=Name, OU=Department
Name, DC=Server Name
D
Press [Change] under [Password].
E
Enter the password, and then press
[OK].
Note
❒ The user name and password
are required for administrator
access to the LDAP server.
48
❒ You can set the user name and pass-
word in this machine's Address
Book to allow individual authentica-
tion access to the LDAP server. Use
Administrator Tools to select the user
name and password you want to use.
For details, see General Manual.
To test the connection
Access the LDAP server to check the
proper connection is established.
Check authentication works accord-
ing to the authentication settings.
A
Press [Connection Test].
A connection test is carried out.
B
Press [Exit].
Note
❒ If the connection test fails, check
your settings and try again.
❒ This function does not check search
conditions or the search base.
To set search conditions
You can enter an attribute as a typical
search keyword. Using the entered at-
tribute, the function searches the
LDAP server's Address Book.
A
Press [TNext] twice.
B
Press [Change] for items you want
to use as search conditions from
the following: [Name], [E-mail Ad-
dress], [Fax Number], [Company
Name], and [Department Name].