Using Pure Ip In The Netware 5 / 5.1 Or 6 / 6.5 Environment - Lanier LD225 Network Manual

In the [File Server Name:] box, enter
the name of the file server in which
a print server is created. You can
also click [Browse...] to browse
through available file servers and
NDS context names.
In the [NDS Tree] box, enter the name
of the NDS tree in which a print serv-
er is created using up to 32 alphanu-
meric characters. Hyphens and
underscores can also be used. You
can also click [Browse...] to browse
through available NDS trees.
For a context, object names are en-
tered from the lowest object with
each object separated by a period.
For example, if you want to create
a print server in NET under DS, en-
ter "NET.DS".
H
Enter the print server name in the
[Print Server Name:] box, the printer
name in the [Printer Name:] box, the
print queue name in the [Print
Queue Name] box, and the print
queue volume in the [Print Queue
Volume] box, and then click [Next >].
• In the [Print Server Name:] box,
enter the name of the NetWare
print server using up to 47 char-
acters.
• In the [Printer Name:] box, enter
the name of the NetWare printer.
• In [Print Queue Name] box, enter
the print queue volume.
• In [Print Queue Volume], type the
print queue volume. For a vol-
ume, object names are entered
from the lowest object with each
object separated by a period.
You can also click [Browse...] to
browse through available vol-
umes.
I
Check the settings, and then click
[Next >].
The settings are applied, and NIB
Setup Tool quits.
J
Turn the printer off and then on
again.
Note
❒ To check that the configuration
is made correctly, enter the fol-
lowing from the command
prompt.
F:> NLIST USER /A/B
❒ If the printer works as config-
ured, the name of the print serv-
er appears as a connected user.
❒ If you cannot identify the print-
er you want to configure, check
the printer name with the con-
figuration page printed from
the printer. For details about
printing a configuration page,
see Printer Reference.
❒ If no printer names appear in
the list, match the frame types
of IPX/SPXs for the computer
and printer. Use the [Network]
d i a l o g b o x o f W i n d o w s t o
change the frame type of the
computer.
Reference
When using the printer in a
pure IP environment of Net-
Ware 5 / 5.1 or NetWare 6.0, see
p.57 "Using Pure IP in the Net-
Ware 5 / 5.1 or 6 / 6.5 Environ-
ment".
Using Pure IP in the NetWare 5
/ 5.1 or 6 / 6.5 Environment
Follow the procedure below to con-
nect the machine as a print server in a
pure IP environment of NetWare 5 /
5.1 or NetWare 6 / 6.5.
If TCP/IP and IP address is set, con-
figure using Web Image Monitor.
If IPX is set, configure using NIB Set-
up Tool.
Using NetWare
3
57