Web; Wiconfig - Lanier LD225 Network Manual

web

Use the "web" command to display
and configure parameters on Web
Image Monitor.
❖ View Settings
msh> web
❖ URL Configuration
You can set URLs linked by click-
ing [URL] on Web Image Monitor.
Specify "1" or "2" for x as the
number corresponding to the URL.
Up to two URLs can be registered
and specified.
msh> web url http://"The
URL or IP address you want
to register"/
❖ Deleting URLs registered as link des-
tinations
msh> web x clear url
Specify "1" or "2" for x as the corre-
sponding number to the URL.
❖ Link name configuration
You can enter the name for [URL]
that appears on Web Image Moni-
tor.
Specify "1" or "2" for x as the corre-
sponding number to the link
name.
msh> web name "Name you
want to display"
❖ Deleting URL names registered as
link destinations
msh> web x clear name
Specify "1" or "2" for x as the
number corresponding to the link
name.
❖ Help URL Configuration
You can set URLs linked by click-
ing [Help] or [?] on Web Image
Monitor.
Remote Maintenance by telnet
msh> web help http://"Help
URL or IP address"/help/
❖ Deleting Help URL
msh> web clear help

wiconfig

Use the "wiconfig" command to make
settings for IEEE 802.11b.
❖ View settings
msh> wiconfig
❖ View IEEE 802.11b settings
msh> wiconfig cardinfo
• If IEEE 802.11b is not working
correctly, its information is not
displayed.
❖ Configuration
msh> wiconfig "parameter"
Parameter Value configured
mode [ap|ad- You can set the infra-
hoc|802.11adh structure mode (ap) ,
oc] the 802.11 Ad hoc
mode (802.11adhoc), or
the ad hoc mode (ad-
hoc).
The default is ad hoc
mode.
ssid "ID val- You can make settings
ue" for the SSID in the in-
frastructure mode.
Usable characters are
ASCII 0x20-0x7e (32
bytes).
An SSID value is set
automatically to the
nearest access point if
no setting is made.
If no setting is made for
the ad hoc mode, the
same value as for the
infrastructure mode or
an ASSID value is au-
tomatically set.
4
103