Lanier LD225 Network Manual page 115

Messages
Exceed Booklet Stapling Limit
Full: Copy Tray
Full: Finisher
Full: Finisher Booklet Tray
Full: Finisher Shift Tray
Full: Finisher Shift Tray 1, 2
Full: Finisher Tray
Full: Finisher Upper Tray
Full: Hole Punch Receptacle
Full: Internal Shift Tray
Full: Internal Tray 1
Full: Internal Tray 2
Full: Waste Toner
Full: Waste Toner Bottle
Hex Dump Mode
Immed. Trans. not connected
Immediate Transmission Failed
In Use: Copier
In Use: Fax
In Use: Finisher
In Use: Input Tray
In Use: Staple Unit
Independent-supplier Toner
Key Card not inserted
Key Card/Counter not inserted
Key Counter not inserted
Loading Toner...
Low: Black Toner
Low: Cyan Toner
Low: Magenta Toner
Low: Toner
Getting Printer Information over the Network
Description
The printing has exceeded the stapling limit of the
booklet finisher.
The output paper tray is full.
Finisher tray is full.
Booklet tray of Finisher is full .
Shift tray of Finisher is full.
The shift tray 1 and 2 of Finisher are full.
Finisher Tray is full.
Finisher's upper tray is full.
Punch Chip receptacle for hole punch is full.
The internal shift tray is full.
Internal tray 1 is full.
Internal tray 2 is full.
Waste toner is full.
Waste toner bottle is full.
It is a hex dump mode.
It did not connect directly with the other party of the
transmission.
An error has occurred while transmitting directly.
The copier is being used.
The fax is being used.
Other functions is using Finisher.
Other functions is using the input tray.
Other functions is using the staple unit.
Toner that is not recommended is set.
The machine is waiting for key card to be inserted.
The machine is waiting for key card or key counter to
be inserted.
The machine is waiting for key counter to be left in it.
Toner is being supplied.
The black toner cartridge is not set correctly, or toner
is almost running out.
The cyan toner cartridge is not set correctly, or toner is
almost running out.
The magenta toner cartridge is not set correctly, or
toner is almost running out.
The toner cartridge is not set correctly, or toner is al-
most running out.
4
109