Sears LXI series 580.55154490 Owner's Manual page 50

Checking and Clearing VCR Plus+ program
Programs can be checked(or cleared) whenever the
VCR is turned on.
_]) Press the VCR Plus+ button twice on the remote
control to display the main menu.
VCR PLUS PROGRAM
PUSH SELECTION NUMBER
1 VCR PLUS PROGRAM
2 PROGRAM REVIEW
3 CHANNEL MAPPING
4 CABLE BOX (NO)
5 CABLE BOX SET UP
TO END PUSH VCR PLUS
OPress number button "2" for PROGRAM
REVIEW. The TV screen will display the
information for the first PlusCode program in
memory.
NORMAL PROGRAM
PROGRAM 1
CATV109 SPEED SP
START TIME 09:05 PM
STOP TIME 10:35 PM
START DATE 09/02/94
FRI
TO CONTINUE PUSH NO. 2
TO ERASE PUSH CLEAR
TO END PUSH VCR PLUS
Press the number button "2" again if you want to
review the information for the next program in
memory.
If you press "2" to review, and you have not
entered any programs, the display will flash
"EMPTY" for 3 seconds.
_]) If you want to clear a program from memory,
press the CLEAR button on the remote control
when the program appears on the -IV screen.
_When you are finished, press the VCR Plus+
button to remove the program menu from the TV
screen.
NOTES:
• One-time timer programs clear automatically
when the recording is finished.
• Daily and weekly programs remain in the timer
memory until deleted.
• All programs are erased if power is interrupted.
- 49 -