Sears LXI series 580.55154490 Owner's Manual page 16

TV PRESET BUTTON
Toprogram the remotecontrol t o operate a TV,set
the VCR/TV mode select s witchtothe "TV"position.
Pressthe TV PRESETbuttonand hold it down.
Whileholdingdownthe TV PRESET button,press
oneof the NUMBER buttonsdepending uponthe
makerof TV as shownpage19.Thenrelease both
buttons.
NOTES:
• TV/VCR common keys: 0 - 9, channel up/down,
power on/off, 100.
• necessary to select TV or VCR mode with
VCR/TV selector.
• Keys only for TV: mute, volume up/down.
• not necessary to select the mode.
The remote control operates most name brand TV's.
But if the TV manufacturers change their "FV code
system and or control carrier frequencies, the MBR
remote control may not work.
VCR/TV MODE SELECT SWITCH
Set to '"VCR" position to operate the VCR.
Set to "TV" position to operate the TV.
For example, when this switch is set to "VCR"
position and you press the POWER button, you can
turn the VCR power on and off.
When this switch is set to "TV" position and you
press the POWER button, you can turn the TV
power on and off.
"TAPE SPEED" BUTTON
Changes tape speed in the recording mode.
Record and playback time is as follows:
TAPESPEED Video Cassette _,,_
Indicator "1"-60 T-120 T-160 ""q_.
SP 60 min. 120 min. 160 min. _._,_
LP 120 min. 240 min. 320 rain. _"_ql!
EP 180 min. 360 min. 480 rain.
In the playback mode, tape speed is automatically
selected to match the recording speed.
NOTE: This VCR is not designed to record in LP
mode.
VOL CHANNEL
o00
®
CLOCK/COUNT
REMAIN RESET VCR Plus+
(o o CD)
MENU
CLEAR/
MONITOR DISPLAY
0 0
® ® ®
® ® ®
® @ @
TVNCR
@ ® O
_,UTO TRK. TRACKING(V.LOCK) •
-15-