Sears LXI series 580.55154490 Owner's Manual page 42

NOTES:
To change an incorrect entry, or an undesired entry, proceed as follows;
1. Press "CLEAR" button repeatedly until the digit to be changed flashes.
2. Enter the correct number.
Press 'MENU" to enter your program and return
to the menu display.
If the program preset time is past, the "PAST
TIME PROGRAMMED" message will blink on the
screen.
Return to the incorrect program and reprogram it
with the correct time.
NORMALPROGRAM
PROGRAM 1
CH 04 SPEED SP
START TIME 01:00 PM
STOP TIME 01:30 PM
START DATE 09/01/94
THU
PAST TIME PROGRAMMED
TO END PUSH MENU
Press MENU" again to return to the main menu display.
Additional program may be entered by repeating steps _ ~ _.
If you are finished programming and you want to set the VCR to record the programs you have entered, a)
make sure you have inserted a tape in the machine, and b) press the POWER button to OFF (Timer mark
l_) appears).
The VCR is now set to record the preset programs.
CHECKING THE TIMER PROGRAM
Program can be checked whenever the VCR is
tuned on.
1. Press "MENU" on the remote control to display
the menu.
2. Press "5" to review the program. (Program
Review). The program review menu will appear
on the TV screen.
3. Press "5" again if you want to review the next
program information.
4. When you are finished, press "MENU" again.
NORMALPROGRAM
PROGRAM 1
OH 04 SPEED SP
START TIME 06:00 PM
STOP TIME 07:30 PM
START DATE 09/02/94
FRI
TO CONTINUE PUSH NO.5
TO ERASE PUSH CLEAR
TO END PUSH MENU
-41 -