Pause/Still; Frame Advance; Double Speed Playback - Sears LXI series 580.55154490 Owner's Manual

PAUSE/STILL
When "PAUSE/STILL" button is pressed during
recording. " _E__P " will appear and the VCR will
stop recording. This feature can be used for
eliminating unwanted station breaks or program
material while recording a TV program or when
using a camera from one scene to another. To start
again press "PAUSE/STILL" button, and " p "
indication will go off and the VCR will continue
recording. When "PAUSE/STILL" button is pressed
during playback, " 5T I L L " will appear and a still
picture can be seen. To start again press "PLAY(X2)"
or "PAUSE/STILL" button and the VCR will continue
playback.
NOTES:
1. If a noise band is seen during STILL, first press
"SLOW" button and "TRACKING" (" • " or " • ")
button to eliminate the noise.
2. The tape recorded at LP mode will contain more
noise and flagging than the tape recorded at SP
or EP mode.
Q (_) O
® ® ®
® ® ®
3. When the PAUSE (STILL) mode continues for
more than about 5 minutes, the VCR will
automatically change to stop mode to protect the
tape.
FRAME ADVANCE
Every time you press "F/ADV" (Frame Advance)
button in the STILL (play pause) mode, tape will be
played back one frame at a time.
It operates only after "PAUSE/STILL" button has
been pressed.
Press the "PLAY(X2)" button to resume normal
playback.
DOUBLE SPEED PLAYBACK
II ........ ill
_) Button
_Q_D
CD C_D C2D
® ® ®
® ® ®
® ® ®
_!!!i!i_ili!i!iiiiii!ii
ii_iiii;i;iiii!iii!iiii!
iii_ii!i!!!i!i_i!iiiiii
iiiiiiiiiiii!ii!;i!il
iiiiiiiiiiiiiiiiiiiii
iiii iiiiliiiiiiiiii
i! iiiiiiiiiiiiiiii
When "PLAY (x2)" button is pressed during playback
mode, a double speed playback picture of the
normal speed (SP or EP recorded tape) can be
seen. Press "PLAY (X2)" button to return to the
normal playback mode, and the VCR will continue
playback.
NOTES:
1. During double speed playback, a certain amount
of noise may appear on the screen. If so, press
"TRACKING" ("• " or " • ") button to find the
position at which the least amount of noise
Occurs.
2. The double speed playback feature is intended
for use with SP or EP recordings.The LP recor-
ding will contain too much noise (interference) to
produce a viewable picture.
- 33 -