Normal Playback - Sears LXI series 580.55154490 Owner's Manual

NORMAL PLAYBACK
El
ReW/_ _ FFt_
CUUW
MENU _ _S_Y
@ ® ®
® ® ®
® ® ®
o
NOTES:
• Make sure that the Timer indicator in the VCR
indicator panel is not shown. If it is, press the
POWER button once.
• This VCR is equipped with an Auto Power on
system, which operates when a cassette is
inserted into the VCR. Additionally, the unit will
start "auto play" if a tape is inserted without its
record protect tab in place.
Insert a prerecorded video cassette. The
cassette indicator will light. At this time, the VCR
is automatically turned on(AUTO POWER ON).
Turn the TV set ON, and select channel 3 or 4,
the same as VCR's output channel.
NOTE:If a direct VIDEO/AUDIO connection is
made between the VCR and TV, set the source
selector on the television to VIDEO.
Press the PLAY(X2) button once.
• It is not necessary to select the tape speed for
playback. It will be automatically selected by
the VCR.
• In playback, the position of the TV/VCR
Selector is automatically set to the VCR
position.
• "PLAY" appears on the VCR indicator panel
and on the TV screen momentarily.
Press the STOP button to stop playback.
"STOP" appears on the VCR indicator panel and
TV screen momentarily.
• The unit has AUTOMATIC REWIND. At the
very end. of the tape, the VCR will
automatically stop and rewind the tape.
• TRACKING CONTROL
AUTO TRACKING
Usually automatic tracking function adjusts the
picture. (The "AUTO TRK" indicator lights on the
VCR indicator panel and TV screen).
The AUTO TRACKING function works in the
following cases.
• A tape is played back for the first time.
• Tape speed(SP, LP, EP) changes.
• Streaks or snow appear because of scratches
on the tape.
• AUTO TRACKING was pressed after
manually adjusting the tracking.
[_ MANUAL TRACKING
If noise appears on the screen during playback,
press either "V" or "A" until the noise on the
screen is reduced or eliminated.
NOTES:
• In case of vertical jitter in still mode carefully
adjust these controls for a stable picture.
• Tracking is automatically reset to normal when
the tape is ejected or the power cord is
unplugged.
- 31 -