Sears LXI series 580.55154490 Owner's Manual page 41

Press a digit from "1" to "3" on the remote control
to select the recording speed you want
program("1" for SP, "2" for EP, "3" for AUTO
mode).
NOTE: If you select the "AUTO" mode, the
"AUTO" mode automatically determines how
much tape is left and §witches speed according.
The "AUTO" mode starts recording at SP speed,
but if it finds out there is not enough tape left to
complete the programmed recording, it switches
over to EP speed.
There will be some distortion in picture and
sound at the point where speed is switched.
(for example, "1" for SP) The display will then
prompt you to enter the recording start time.
NORMALPROGRAM
PROGRAM1
CH04 SPEED SP
STARTTIME :
TO END PUSH MENU
t_ Press five digits, two for the hour and two more
for the minute and one more for AM or PM (for
example, "0" "6" "0" "0" "2" for 6:00 PM). Press
"1" for AM or "2" for PM. The display will prompt
you to select the stop time.
NOTE: Always press "0" before a single digit
hour and minute.
NORMALPROGRAM
PROGRAM 1
CH 04 SPEED SP
START TIME 06:00 PM
STOP TIME--: ....
TO END PUSH MENU
_) Press five digits, two for the hour and two more
for the minute and one more for AM or PM (for
example, "0" "7" "3" "0" "2" for 7:30 PM).
NOTE: The present month, day and year for the
DATE (for example, 090194 for September 1, to
change it at step 12).
NORMALPROGRAM
PROGRAM 1
CH 04 SPEED SP
START TIME 06:00 PM
STOP TIME 07:30 PM
START DATE 09/01/94
THU
TO END PUSH MENU
Press four digits, two for the start month and two
more for the start date, (for example, "0" "9" "0"
"2" to begin recording on September 2). The year
and day of the week are displayed automatically.
NORMALPROGRAM
PROGRAM 1
CH 04 SPEED SP
START TIME 06:00 PM
STOP TIME 07:30 PM
START DATE 09/02/94
FRI
TO END PUSH MENU
- 40 -