Sears LXI series 580.55154490 Owner's Manual page 24

AUDIO MODE DISPLAY
The VCR has two separate audio recording systems
the high quality "VHS Hi-Fi" system and standard
"NORMAL" system. The same audio is recorded on
both systems. The "VHS Hi-Fi" system records on
separate (left and right) channels, and the
"NORMAL" system records monaural sound. The
normal track is always recorded so the cassette can
be played on the VCR that does not have "VHS Hi-
Fi".
• Press "1" when the AUDIO MODE SET menu is
displayed switches the AUDIO MODE display
between Hi-Fi and NORMAL.
Press
"1" to
change.
AUDIO MODE SET
PUSH SELECTION NUMBER
1 AUDIO MODE (HI-FI)
2 BROADCAST TYPE (STEREO)
3 AUDIO OUTPUT (STEREO)
TO END PUSH MENU
BROADCAST TYPE DISPLAY
(STEREO/MONO/SAP)
Multichannel Television Sound (MTS) carries stereo
and/or Second Audio Program (SAP) bilingual
signals. Set this display to the desired position when
both MTS indicators (Stereo and SAP) are lit. When
only one for the MTS indicators is lit, the VCR
automatically selects the corresponding receiving
mode (Stereo or SAP) regardless of display position.
• Press "2" when the AUDIO MODE SET menu is
display switches the BROADCAST TYPE display
between STEREO, MONO, and SAP.
Press
"2" to
change.
AUDIO MODE SET
PUSH SELECTION NUMBER
1 AUDIO MODE (HI-FI)
2 BROADCAST TYPE (STEREO)
3 AUDIO OUTPUT (STEREO)
TO END PUSH MENU
For normal operation, the display should be in the
STEREO position. The VCR will then record a
STEREO program when available, and record a
mono program IF NOT IN STEREO.
BROADCAST
TYPE
MONO
STEREO
MONO+SAP
STEREO+SAP
POSITION
OFSWITCH
MONO
STEREO
SAP
MONO
STEREO
SAP
MONO
STEREO
SAP
MONO
STEREO
SAP
RECORDE_
AUDIO OUTPUT
L R
MON0 MONO
MON0 MON0
MON0 MONO
MON0 MONO
L R
L R
MONO MON0
MON0 MON0
SAP SAP
MONO MONO
L R
SAP SAP
RF OUTPUT
(CH3or OH4)
MON0
MONO
MONO
MONO
MONO
MONO
MONO
MONO
SAP
MONO
MONO
SAP
NOTE: For weak STEREO and/or SAP broadcast-
ing, changing the display to mono may give clearer
sound.
AUDIO OUTPUT DISPLAY
(STEREO/LEFT/RIGHT)
Used during playback when AUDIO MODE display
(Hi-Fi/MONO) is in Hi-Fi position for selecting the
audio output signals from the AUDIO OUT terminals
(L ch and R ch), and RF OUT.
• Press "3" when the AUDIO MODE SET menu is
displayed switches the AUDIO OUTPUT display
between STEREO, LEFT and RIGHT.
Press
"3" to
change.
AUDIO MODE SET
PUSH SELECTION NUMBER
1 AUDIO MODE (HI-FI)
2 BROADCAST TYPE (STEREO)
3 AUDIO OUTPUT (STEREO)
TO END PUSH MENU
SELECTOR
position
L
STEREO
R
AUDIO OUT
terminals
L ch R ch
L L
L R
R R
RF
OUT
L
MONO
R
- 23 -