Sears LXI series 580.55154490 Owner's Manual page 19

POWER
VCR TV TVPRESET
0
o)
MUTE VOL CHANNEt
©
EJECT
®
C!
CLEAR!
MENU MONITOR
CC) O
® ®
® ®
® ®
@ ®
DISPLAY ',
(ZD',
!
®
®
®
TVNCR
O
r_L_TO'TR_: - _W_-oc_ - -_
- -8_'- ¥18_r-tME- - - - J
© © ©
s,
CLOCK!COUNT/REMAIN BUTTON
switch the display between the counter,
remaining tape time, and clock modes.
NOTE: To "CLOCK/COUNT/REMAIN" button does
not work when the tape is not inserted.
COUNTER "RESET" BU'B'ON
readout of the tape counter will return to
"0:00:00" when this button is pressed.
OSD (On Screen Display) FUNCTION BuTroNs
MENU BUTTON
Used to enter the On-Screen Programming mode.
CLEAR/MONITOR BU'B'ON
CLEAR-Used to go backward and correct the
programmed information.
MONITOR-Press MONITOR button to view TV
program during playback. To return to normal play
viewing, press MONITOR button once again. Tape
continues in play mode during Monitoring.
DISPLAY BU'PFON
Press to display the VCR operation mode, tape
counter, channel number, date and clock. Press this
button once again to remove the on-screen display.
Press this button twice to remove the clock display
(the display switches by pressing the "CLOCK/
COUNT/REMAIN" button when tape is inserted).
TRACKING/V.LOCK BUTTONS
• "AUTO" TRACKING: When playback is started,
the auto tracking function operates and adjusts
tracking automatically so the picture is optimized.
EuTu Tg_" flashes in the VCR display for several
seconds and then changes to "PL )qY " indication.
• MANUAL "TRACKING/V.LOCK" CONTROLS
(11 • II
and
liT, I1)
"TRACKING": If noise appears on the screen
during playback, press "V " or "A " button until
the noise on the screen is reduced or eliminated.
"V.LOCK": In case of vertical jitter in still mode
carefully adjust these controls for a stable picture.
NOTES:
• Tracking is automatically reset to normal when a
tape is inserted or the power cord is unplugged.
• Auto tracking may not operate correctly when the
tape is scratched or the recorded condition is
poor.
In this case, press the TRACKING CONTROL
button (V or • ) to adjust tracking.
• If the AUTO TRACKING button is pressed after
operating the tracking control button ( Vor •),
auto tracking operates again.
-18-