Telephone Set Up; Setting Your Local Area Code - GE 29582 User Manual

Telephone Set Up
Youcan customizethe following settings to suit your needs.
Local Area Code Setsyour local area code for Dial Back.
Display Contrast Selectsthe display contrast.
Time/Date Setsthe time and date.
MessageLength Setsthe length of time allowedfor
incoming messages.
Recording Setsthe recordingquality between
Quality standard (STD)andlong play (LONG).
Rings to Answer Selectsthe number of rings before
the unit answers.
r
Default Settings
Local Area Code - - -
Display Contrast 3
Time/Date 12 a.m. 1/01
Message Length 2 minutes
Recording Quality Standard (STD)
Rings to Answer 4
Security Code 123
Dialing Tone J
Remote Access
TONE/PULSE
Dialing
Setsyour B-digitcode usedfor remote accessto the unit.
Setsthe phone for tone or pulsedialing.
Setting Your Local Area Code
i. Pressand releasethe MENUbutton.Thescreen displaysLOCAL AREACODE. The
unit announces,"Setupmenu. UseSKIPor REPEAT t o change setting, press MENU
to save setting."
2.The left-most digit, or a (_)sign flashesindicating the unit isready to acceptthe
area code entry.
3. Usethe keypadto enter your three digit Local Area Code.
/4.After the 3rd and last digit are entered,pressthe MENUbutton to store the area
code and go to the next setting.
NOTE:If you make a mistake, you can use the SKIPor REPEAT
button to move between 1st to 3rd digit and input the number from
the keypad again.
NOTE: To skip to the next setting, press the MENU button. To exit setup,
press the FLASH/E×IT button.
12