Installing The Phone; Desktop Installation - GE 29582 User Manual

Installing the Phone
Desktop Installation
CAUTION: To reduce risk of personal injury, fire, or damage use
i, only the 5-2806 (white) or 5-2807 (black) power adaptor listed in
the user's guide. This power adaptor is intended to be correctly
orientated in a vertical or floor mount position.
1. Plug the coiled cord into the handset. Plug the other end into thejack on the side of
the base.
2. Placethe handset in the base.
B.Plugthe telephoneline cord into
the LINE jack on the back of the
phone.Plugthe other end into a
walljack.
/4.Connectthe small end of the
power adaptor into the POWER
7.5VACjack on the back of the
answerer.Plugthe other end into
an ACpower outlet. Thescreen
displaysPLEASE WAIT....., then
announces "Pressmenu key to set up the unit". The unit is readyfor setup or to
answer calls with the default greeting and settings.
NOTE: The phone automatically defaults to touch-tone dialing. To
change to pulse (rotary) dialing, see "Setting the Dialing Mode."
If you don't know which type of service you have, check with the
phone company.
NOTE: The unit is properly installed if you pick up the handset and
hear the dial tone. Otherwise, recheck all the installation steps.